Request a QuoteWhere to Buy
US
Classic Bay 1200 Pellet Insert
PS Series

Classic Bay 1200 Pellet Insert

The Classic Bay 1200 insert transforms an existing fireplace into a powerful pellet-heating solution, offering an expansive view of the flames.

Request a quote Find a dealer
Heat output
48,500 BTU/hr
Heats up to
2,700 sq ft
Hopper
75 lbs
Fuel
Pellet
Classic Bay 1200 Pellet Insert

The Classic Bay 1200i delivers stunning flames and impressive performance—always on display through its large bay window. Superior technology helps the 1200i produce powerful warmth, while remaining highly efficient.

Features
  • 48,500 BTUs — heats 1,000 to 2,600 square feet, based on climate and home efficiency
  • EPA certified, with low emission levels of .8 grams per hour
  • 75lb hopper capacity
  • Patented feed system for jam-free operation
  • Easy-clean firepot

Starting at $4,538*

Request a quote Find a dealer near you

*“Starting at” prices are estimates only and do not include delivery, installation, venting, finishing materials, accessories, or any applicable taxes. Product availability and display inventory vary by retailer. Contact your authorized retailer for availability and a full project quote.

Full Specifications

Appliance Width
28-1/2"
Appliance Height
25-1/2"
Appliance Depth1
29-3/4"
Depth Minimum Firebox Opening
13-1/4"
Extension Onto Hearth
13-5/8"
Fuel Type
Pellet
Heat Output
48,500 BTU/hr
BTU/hr Input2
17,000 - 48,500
Heating Capacity3
2,700 sq ft
Hopper Capacity4
75 lbs
Viewing Area
153 sq in
Efficiency5
LHV 68%, HHV 64%
Emissions
.8 grams/hour
  1. 1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
  2. 2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.
  3. 3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.
  4. 4 Fuel density and pellet shape will affect hopper capacity.
  5. 5 Weighted average LHV (Low Heating Value) & HHV (High Heating Value) efficiencies using data collected during EPA emissions test.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.