Request a QuoteWhere to Buy
US
Outfitter II Pellet Stove
PS Series

Outfitter II Pellet Stove

Built for long, continuous burns, the Outfitter II pairs powerful pellet heat with an oversized 130 lb hopper.

Heat output
49,200 BTU/hr
Heats up to
2,300 sq ft
Hopper
130 lbs
Fuel
Pellet

Enjoy peace of mind with reliable, efficient warmth and lower fuel bills. The Outfitter II is built for long continuous burns with a 130-lb. hopper—twice the size of most stoves. And it’s easy to set your comfort level with the dial control or wall thermostat. There’s no better choice to replace your old pellet stove or switch from wood to pellets, and “live green” by burning a renewable, clean-burning fuel.

Features
  • Heat large spaces of up to 2,300 square feet depending on climate and home efficiency
  • Load less often with the 130-pound hopper capacity
  • Control with ease using the color dial control and wall thermostat
  • Use less fuel with Higher Heating Value (HHV) efficiency of 82 percent
  • EPA-certified

Starting at $2,879*

*“Starting at” prices are estimates only and do not include delivery, installation, venting, finishing materials, accessories, or any applicable taxes. Product availability and display inventory vary by retailer. Contact your authorized retailer for availability and a full project quote.

Features & Options

Stove Finish

Available Finishes

  • Classic Black

Controls

Have complete control over your fire. Controls listed are tested and approved for recommended use with the hearth systems indicated.

  • Optional Wireless Remote Thermostat

    Remote control (on/off, temperature readout, thermostat mode, timer mode)

  • Standard Dial Control

    Dial control gives you five heat output settings to easily adjust your comfort level.

  • Standard Wired Wall Thermostat

    Easy-to-use wired wall thermostat allows you to set your target room temperature and let the stove do all the work.

Pellet Adapters

  • TPVNT-6 Pellet Adapter: Vertical adapter and clean out

    Adapter designed to attached to appliance exhaust. This will make it easier and cleaner to install your pellet vent adapter and venting. It also provides a easy clean out to give you access to vacuum out the ashes you get from sweeping your chimney without having to remove your venting.

  • TPVNT-7 Pellet Adapter: Vertical adapter and clean out

    Adapter designed to attached to appliance exhaust. This will make it easier and cleaner to install your pellet vent adapter and venting. It also provides a easy clean out to give you access to vacuum out the ashes you get from sweeping your chimney without having to remove your venting.

Full Specifications

Appliance Width
24 1/2"
Appliance Height
36 1/2"
Appliance Depth1
22 7/8"
Fuel Type
Pellet
Heat Output
49,200 BTU/hr
BTU/hr Input2
11,700 - 49,200
Heating Capacity3
2,300 sq ft
Hopper Capacity4
130 lbs
Efficiency5
LHV 88% HHV 82%
Emissions
.53 grams/hour
  1. 1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
  2. 2 BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.
  3. 3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.
  4. 4 Fuel density and pellet shape will affect hopper capacity.
  5. 5 Weighted average LHV (Low Heating Value) & HHV (High Heating Value) efficiencies using data collected during EPA emissions test.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

Owner Resources